Himax Mould Release B-11
Himax B-11 is modified silicone fluid with the appearance of light straw transparent viscous liquid. In general, printing and painting after usage conventional silicone release was considered difficult, but such procedure like hot stamping, printing, ect, after the application of B-11 has become possible. The conventional silicone release agents offer outstanding release properties but their presence resulted in difficulty for painting, printing and stamping. Himax B-11 is release agent of the oil type, which are free from this disadvantage.
HIMAX® 5 SHOTS Anti Rust OIL FREE NANO COATING (450ml)
Appearance : Semi Clear Coating & Blue Coating Features:
- 3~8 shots to clear the residue.
- Low VOC with superior anti rust properties.
- No cleaning required before & after but easily remove by any hydrocarbon solvent.
- Anti-corrosion protective coating of no oily or grease content.
- No oil migration into ejector pin.
- Heat tolerance temperature of coating is 18-135C.
- Silicone Free.
- It is Food Grade Anti Rust product with SGS Certificate.
HIMAX® Anti Rust OIL FREE COATING (450ml)
Appearance : Semi Clear Coating or Blue Coating Features:
- 3 shots to clear the residue.
- Low VOC with superior anti rust properties.
- No cleaning required but easily clean by any hydrocarbon solvent.
- Anti-corrosion protective coating of no oily or grease content.
- No oil migration into ejector pin.
- Heat tolerance temperature of coating is 80-1350C.
HIMAX® Anti Rust OIL LESS CLEAR NANO COATING L26S/ L-26S (B) (450ml)
Appearance : Clear & Bluish Features:
- Excellent Anti-corrosion protective coating.
- Low VOC with superior anti rust properties.
- Silicone Free.
- Very less oil chemical base.
- It is Food Grade Anti Rust product with SGS Certificate.
- Easily clean up by any solvent cleaner.
HIMAX® Anti Rust Peelable Film Coating TF-03 (450ml)
Appearance : Gold or Silver Colour Features:
- Anti-corrosion protective coating of no-oily or grease content.
- Peel able film coating.
- UV Resistance.
- Exterior Use only.
- Anti-scratches.
HIMAX® Anti Rust THIN NANO COATING HB-7S / HB-7S (B) (450ml)
Appearance : Clear & Bluish Features:
- Excellent Anti-corrosion protective coating.
- Low VOC with superior anti rust properties.
- Silicone Free.
- Very thin Nano Coating with non-oily based.
- Fast dry.
- It is Non-toxic & Food Grade Antirust product with SGS Certificate.
- Easily clean up by any solvent cleaner.
HIMAX® Chain Lub TS-50 (300ml)
Appearance : White Liquid Features:
- High performance water resistant chain lubricant.
- Excellent anti-fling characteristics.
- Fully synthetic chain lubricant.
- Extremely tacky and waterproof.
- Long lasting with P.T.F.E. added.
- Excellent in reducing friction, heat and water.
- Provide damping effect and reduce noise.
- Himax Chain Lub TS-50 is suitable to use for all motorbike chain, outdoor parts and machinery parts which may expose to water.
HIMAX® Ejector Pin Lubricant TS-11 (150ml)
Appearance : Colourless Transparent Liquid Features:
- Translucent liquid.
- No oil migration into parts.
- High temperature up to 400C.
- Silicone FREE.
- For slides, ejector pins & low speed bearings, chains, treaded connections, moving parts under high pressure & high temperature. It also lubricates & prevents burn on screw tips, manifold bolts, nozzles & heating cylinders.
HIMAX® Electrical Contact Cleaner K-11C (450ml)
Appearance : Colourless Transparent Liquid Features:
- Has dielectric strength of 20,000 volts.
- Used as cleaner for machine PCB board and contact lubricant.
- Good reducing humming noise for contacted area.
- Good moisture displacement property which can use to restart wet starter engine.