Shop

  • Himax Mould Release B-11

    Himax B-11 is modified silicone fluid with the appearance of light straw transparent viscous liquid. In general, printing and painting after usage conventional silicone release was considered difficult, but such procedure like hot stamping, printing, ect, after the application of B-11 has become possible. The conventional silicone release agents offer outstanding release properties but their presence resulted in difficulty for painting, printing and stamping. Himax B-11 is release agent of the oil type, which are free from this disadvantage.

  • HIMAX® Anti Rust SHIELD/OIL Type L-26/L-26B (450ml)

    Appearance : Clear(L-26) or Blue(L-26B)

    Features:

    • Excellent rust prevention agent.
    • Oil chemical base.
    • Forming quality oil base protective film and adhering tightly to surface.

    Application :

    Plastic Injection Moulds, Rubber Moulds, Stamping Dies, Jig and Fixtures, Plastic Instruments, Machines Tools and Ground Steel of all kind.

  • HIMAX® Anti Rust OIL FREE COATING (450ml)

    Appearance : Semi Clear Coating or Blue Coating

    Features:

    • 3 shots to clear the residue.
    • Low VOC with superior anti rust properties.
    • No cleaning required but easily clean by any hydrocarbon solvent.
    • Anti-corrosion protective coating of no oily or grease content.
    • No oil migration into ejector pin.
    • Heat tolerance temperature of coating is 80-1350C.

    Application:

    Plastic Injection Moulds, Rubber Moulds, Stamping Dies, Jig and Fixtures, Plastic Instruments, Machines Tools and Ground Steel of all kind.

    Also suitable for food packaging applications.

  • HIMAX® Anti Rust Peelable Film Coating TF-03 (450ml)

    Appearance : Gold or Silver Colour

    Features:

    • Anti-corrosion protective coating of no-oily or grease content.
    • Peel able film coating.
    • UV Resistance.
    • Exterior Use only.
    • Anti-scratches.

    Application:

    HIMAX Mould Protection TF-03 effectively protects outside of metal part which needs to be protected from scratches; easy to differentiate the metal mold by using different color either gold or silver.

  • HIMAX® Anti Rust WAX Type HB-7/HB-7B (450ml)

    Appearance : Clear(HB-7) or Blue(HB-7B)

    Feature:

    • New advance anti-corrosion agent.
    • Wax chemical base.
    • Forming quality wax base protective film with no oil content.
    • Good rust prevention properties even to salt and water vapour.
    • Easily remove by heating up the mould above 50oC.

    Application :

    Plastic Injection Moulds, Rubber Moulds, Stamping Dies, Jig and Fixtures, Plastic Instruments, Machines Tools and Ground Steel of all kind.

  • HIMAX® Electrical Contact Cleaner K-11C (450ml)

    Appearance : Colourless Transparent Liquid

    Features:

    • Has dielectric strength of 20,000 volts.
    • Used as cleaner for machine PCB board and contact lubricant.
    • Good reducing humming noise for contacted area.
    • Good moisture displacement property which can use to restart wet starter engine.

    Application :

    For cleaning PCB board, IC circuit, bulb,

    transistor or any electrical contact point.

  • HIMAX® FOAM Cleaner (Water base) K-11W (450ml)

    Appearance : Whitish

    Features:

    • Concentrated and non-flammable degreaser.
    • Degreases by saponification and emulsification that breaks up fats and oil chemical, so can be rinsed away after being dissolved.
    • Harmless on pained surfaces and all metals.
    • Provides greater strength and cleaning power on toughest stains, grease, oil carbon, wax dye without hard scrubbing.
    • No harsh solvent odour.

    Application :

    Used for general plant degreasing include machinery, tools, floors and walls.

  • HIMAX® Paintable Mould Release B-11 (450ml & 550ml)

    Appearance : Colourless Transparent Liquid.

    Features:

    • Active release agent with a quality silicone oil.
    • Available grade from oily to non oily (B-11C, B-11A, B-11E & B-11F).
    • Operating temperature up to 300oC.
    • Paintable with high release ease.
    • Silicone base.

    Application :

    • For processing thermoplastic, thermosets and elastomers material.
    • For general purpose lubricant for rubber, glass, plastic and metal surfaces where friction or release is a problem.
    • Subsequent treatment of moulded parts, such as printing or painting.
  • HIMAX® Premium Lubricant TS-40 (450ml)

    (Equivalent WD-40)

    Appearance : Light Yellowish

    Features:

    • Lubricates and restoring smooth action; stop annoying squeaks and free sticking parts.
    • Protects against rush and corrosion on metal surface, aluminium, gardening tools, grills and dies.
    • Penetrate and breakaway rust and corrosion, free struck, frozen or rusted parts.
    • Clean and degrease dirt, oil and grease.
    • Dissolve adhesives, allowing easy removal or sticky material.

    Application :

    Apply for rollers, gears, bearing, chains, locks, zippers, wheels, doors, windows. Various application in manufacturing, home, office, gardening, sport, vehicles, marine and etc.

  • HIMAX® SOLVENT CLEANER K-11 General Use Quick Dry Type (550ml)

    Appearance : Colourless Transparent Liquid

    Features:

    For removal of corrosive parts, grease, oil and wax.

    Application :

    Clean moulded parts, machine components and tools.

  • HIMAX® Solvent Cleaner K-11A (450ml) Slow dry.

    Appearance: Colourless transparent liquid

    Features:

    • Alcohol based compound cleaning agent that can be used for electrical and light cleaning duty.
    • Special for AT-18(EX) / AT-18B(EX) use only.
  • HIMAX® Solvent Cleaner K-11B (450ml) Fast Dry.

    Appearance: Colourless Transparent Liquid

     Features:

    • Organic solvent based for soft cleaning purpose.
    • Harmless to plastic surface.

    Application :

    Degreasing sheet metal, parts, moulds.